ਸਟੇਟਸਮ HL2000.4

Stetsom HL 2000.4 Multichannel Car Audio Ampਵਧੇਰੇ ਉਪਯੋਗਕਰਤਾ ਦਸਤਾਵੇਜ਼

ਮਾਡਲ: HL2000.4

1. ਜਾਣ-ਪਛਾਣ

This manual provides detailed instructions for the installation, operation, and maintenance of your Stetsom HL 2000.4 Multichannel Car Audio Amplifier. The HL 2000.4 is a 4-channel amplifier designed to deliver powerful and clear audio performance for your in-car entertainment system. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to prevent damage.

Stetsom HL 2000.4 Multichannel Car Audio Ampਵਧੇਰੇ ਜੀਵਤ

ਚਿੱਤਰ 1.1: ਸਾਹਮਣੇ view of the Stetsom HL 2000.4 Multichannel Car Audio Ampਜੀਵ

2 ਸੁਰੱਖਿਆ ਜਾਣਕਾਰੀ

ਇੰਸਟਾਲੇਸ਼ਨ ਅਤੇ ਸੰਚਾਲਨ ਦੌਰਾਨ ਹਮੇਸ਼ਾਂ ਹੇਠ ਲਿਖੀਆਂ ਸੁਰੱਖਿਆ ਸਾਵਧਾਨੀਆਂ ਦੀ ਪਾਲਣਾ ਕਰੋ:

  • Disconnect the vehicle's battery negative terminal before any electrical work.
  • ਸ਼ਾਰਟ ਸਰਕਟਾਂ ਨੂੰ ਰੋਕਣ ਲਈ ਯਕੀਨੀ ਬਣਾਓ ਕਿ ਸਾਰੀਆਂ ਤਾਰਾਂ ਸਹੀ ਢੰਗ ਨਾਲ ਇੰਸੂਲੇਟ ਕੀਤੀਆਂ ਗਈਆਂ ਹਨ।
  • ਨੂੰ ਮਾਊਂਟ ਕਰੋ amplifier securely in a dry, well-ventilated area, away from direct sunlight, heat sources, and moisture.
  • ਇਸ ਮੈਨੂਅਲ ਵਿੱਚ ਦੱਸੇ ਅਨੁਸਾਰ ਪਾਵਰ, ਗਰਾਊਂਡ ਅਤੇ ਸਪੀਕਰ ਕਨੈਕਸ਼ਨਾਂ ਲਈ ਢੁਕਵੀਂ ਗੇਜ ਵਾਇਰਿੰਗ ਦੀ ਵਰਤੋਂ ਕਰੋ।
  • ਦਾ ਸੰਚਾਲਨ ਨਾ ਕਰੋ ampਜੇਕਰ ਇਹ ਖਰਾਬ ਹੈ ਜਾਂ ਖਰਾਬ ਹੈ ਤਾਂ ਲਾਈਫਾਇਰ। ਸਮੱਸਿਆ-ਨਿਪਟਾਰਾ ਭਾਗ ਵੇਖੋ ਜਾਂ ਯੋਗ ਸੇਵਾ ਕਰਮਚਾਰੀਆਂ ਨਾਲ ਸੰਪਰਕ ਕਰੋ।
  • ਦਾ ਪਰਦਾਫਾਸ਼ ਕਰਨ ਤੋਂ ਬਚੋ amplifier to extreme temperatures or vibrations.

3. ਪੈਕੇਜ ਸਮੱਗਰੀ

ਪੁਸ਼ਟੀ ਕਰੋ ਕਿ ਸਾਰੀਆਂ ਚੀਜ਼ਾਂ ਪੈਕੇਜ ਵਿੱਚ ਮੌਜੂਦ ਹਨ:

  • Stetsom HL 2000.4 Ampਵਧੇਰੇ ਜੀਵਤ
  • ਉਪਭੋਗਤਾ ਮੈਨੁਅਲ (ਇਹ ਦਸਤਾਵੇਜ਼)

4. ਉਤਪਾਦ ਖਤਮview

4.1 ਮੁੱਖ ਵਿਸ਼ੇਸ਼ਤਾਵਾਂ

  • Provides 2000W of power for high-quality audio performance.
  • Compatible with various car audio setups, including subwoofers, mids, and highs.
  • Features an efficient cooling system to prevent overheating and ensure reliability.
  • Compact design allows for flexible installation in various vehicle interiors.
  • Designed for user-friendly installation with clear controls.

4.2. Amplifier Components and Controls

Familiarize yourself with the input, output, and control sections of the ampਜੀਵ

Input and Audio Controls Diagram

Image 4.1: Input and Audio Controls Panel.

  1. INPUT (RCA): Audio signal input connectors for front and rear channels.
  2. ਪੱਧਰ: Gain control to match the amplifier's input sensitivity with the head unit's output.
  3. CROSSOVER (HPF/LPF): Switches to select High-Pass Filter (HPF), Low-Pass Filter (LPF), or Full Range (FLAT) modes.
  4. ਅਧਾਰ ਨੂੰ ਹੁਲਾਰਾ: Control for adjusting bass enhancement.
  5. ਕੂਲਰ: Ventilation area for the cooling system.
Audio Output and Power Connections Diagram

Image 4.2: Audio Output and Power Connections Panel.

  1. ਆਉਟਪੁੱਟ ਕਨੈਕਟਰ: Speaker terminals for connecting front and rear speakers, or for bridging channels.
  2. POSITIVE POWER SUPPLY CONNECTOR (+12V): Terminal for connecting the positive power cable from the battery.
  3. ਰਿਮੋਟ ਕਨੈਕਟਰ (REM): Terminal for connecting the remote turn-on wire from the head unit.
  4. NEGATIVE POWER SUPPLY CONNECTOR (GND): Terminal for connecting the ground cable to the vehicle chassis.

5. ਸੈੱਟਅੱਪ ਅਤੇ ਇੰਸਟਾਲੇਸ਼ਨ

ਅਨੁਕੂਲ ਪ੍ਰਦਰਸ਼ਨ ਅਤੇ ਸੁਰੱਖਿਆ ਲਈ ਸਹੀ ਇੰਸਟਾਲੇਸ਼ਨ ਬਹੁਤ ਜ਼ਰੂਰੀ ਹੈ। ਜੇਕਰ ਤੁਸੀਂ ਕਿਸੇ ਵੀ ਕਦਮ ਬਾਰੇ ਅਨਿਸ਼ਚਿਤ ਹੋ, ਤਾਂ ਕਿਸੇ ਪੇਸ਼ੇਵਰ ਇੰਸਟਾਲਰ ਨਾਲ ਸਲਾਹ ਕਰੋ।

5.1. ਮਾਊਂਟ ਕਰਨਾ Ampਵਧੇਰੇ ਜੀਵਤ

  • Choose a mounting location that is dry, well-ventilated, and protected from physical damage.
  • ਆਲੇ-ਦੁਆਲੇ ਕਾਫ਼ੀ ਜਗ੍ਹਾ ਯਕੀਨੀ ਬਣਾਓ amplifier for proper airflow to the cooling system.
  • ਨੂੰ ਸੁਰੱਖਿਅਤ ਕਰੋ amplifier firmly to a solid surface using appropriate screws.

5.2. ਵਾਇਰਿੰਗ ਕਨੈਕਸ਼ਨ

Follow the wiring diagram carefully for power, ground, remote, and speaker connections.

Power Installation Diagram

Image 5.1: Power Installation Diagram.

5.2.1 ਪਾਵਰ ਕਨੈਕਸ਼ਨ

  1. Connect a high-quality power cable (positive, red) from the vehicle's battery to the +12ਵੀ ਟਰਮੀਨਲ ਉੱਤੇ amplifier. Install an appropriate fuse (max. 12 inches from the battery) in line with the positive cable.
  2. Connect a ground cable (negative, black) of the same gauge as the power cable from the ਜੀ.ਐਨ.ਡੀ ਟਰਮੀਨਲ ਉੱਤੇ amplifier to a clean, unpainted metal point on the vehicle's chassis. Ensure a good electrical connection.
  3. Connect a remote turn-on wire (blue, 18 AWG recommended) from your head unit's remote output to the REM ਟਰਮੀਨਲ ਉੱਤੇ ampਲਾਈਫਾਇਰ। ਇਹ ਤਾਰ ਘੁੰਮਦੀ ਹੈ ampਆਪਣੇ ਹੈੱਡ ਯੂਨਿਟ ਨਾਲ ਲਾਈਫਾਇਰ ਚਾਲੂ ਅਤੇ ਬੰਦ ਕਰੋ।

5.2.2. ਆਡੀਓ ਇਨਪੁਟ ਕਨੈਕਸ਼ਨ

  • ਆਪਣੇ ਹੈੱਡ ਯੂਨਿਟ ਦੇ ਪ੍ਰੀ- ਤੋਂ RCA ਕੇਬਲਾਂ ਨੂੰ ਜੋੜੋ-amp outputs (Front and Rear) to the corresponding ਇਨਪੁਟ RCA jacks on the ampਜੀਵ

5.2.3. ਸਪੀਕਰ ਆਉਟਪੁੱਟ ਕਨੈਕਸ਼ਨ

  • ਆਪਣੇ ਸਪੀਕਰਾਂ ਨੂੰ ਨਾਲ ਕਨੈਕਟ ਕਰੋ ਆਉਟਪੁੱਟ ਕਨੈਕਟਰ ਟਰਮੀਨਲ। ਸਹੀ ਪੋਲਰਿਟੀ (+ ਤੋਂ + ਅਤੇ - ਤੋਂ -) ਯਕੀਨੀ ਬਣਾਓ।
  • For 4-channel operation, connect each speaker to its dedicated channel.
  • For bridged operation (e.g., 2-channel or 3-channel), refer to the specific bridging instructions provided in the full product manual or consult a professional. The HL 2000.4 supports bridging for increased power output to fewer channels.

6. ਓਪਰੇਟਿੰਗ ਹਦਾਇਤਾਂ

6.1. ਸ਼ੁਰੂਆਤੀ ਪਾਵਰ-ਅੱਪ

  • ਸਾਰੇ ਕਨੈਕਸ਼ਨ ਬਣਾਏ ਜਾਣ ਅਤੇ ਤਸਦੀਕ ਕਰਨ ਤੋਂ ਬਾਅਦ, ਵਾਹਨ ਦੀ ਬੈਟਰੀ ਨੂੰ ਦੁਬਾਰਾ ਕਨੈਕਟ ਕਰੋ।
  • ਆਪਣੀ ਹੈੱਡ ਯੂਨਿਟ ਚਾਲੂ ਕਰੋ। amplifier's POWER indicator should illuminate. If the PROT (Protection) indicator lights up, refer to the troubleshooting section.

6.2. ਨਿਯੰਤਰਣ ਵਿਵਸਥਿਤ ਕਰਨਾ

  • LEVEL (Gain): Start with the LEVEL control at minimum. Play a familiar piece of music at a moderate volume on your head unit. Slowly increase the amplifier's LEVEL control until you hear distortion, then back off slightly. This sets the gain correctly, preventing clipping and maximizing sound quality.
  • CROSSOVER (HPF/LPF):
    • FLAT (Full Range): Use this setting if your speakers are designed to play the full audio spectrum or if you are using an external crossover.
    • HPF (ਹਾਈ-ਪਾਸ ਫਿਲਟਰ): Use for speakers that should only reproduce mid-range and high frequencies (e.g., component speakers, full-range speakers not intended for deep bass). This filters out low frequencies.
    • LPF (Low-Pass Filter): Use for subwoofers, allowing only low frequencies to pass through.
  • ਅਧਾਰ ਨੂੰ ਹੁਲਾਰਾ: Use this control sparingly to enhance bass frequencies. Excessive bass boost can lead to distortion and potential speaker damage.

7. ਰੱਖ-ਰਖਾਅ

  • ਰੱਖੋ ampਸਾਫ਼ ਅਤੇ ਧੂੜ ਤੋਂ ਮੁਕਤ ਲਾਈਫਾਇਰ। ਸਫਾਈ ਲਈ ਨਰਮ, ਸੁੱਕੇ ਕੱਪੜੇ ਦੀ ਵਰਤੋਂ ਕਰੋ।
  • Ensure that the ventilation openings are not blocked to maintain proper cooling.
  • ਸਮੇਂ-ਸਮੇਂ 'ਤੇ ਸਾਰੇ ਵਾਇਰਿੰਗ ਕਨੈਕਸ਼ਨਾਂ ਦੀ ਕਠੋਰਤਾ ਅਤੇ ਖੋਰ ਲਈ ਜਾਂਚ ਕਰੋ।
  • ਕਠੋਰ ਰਸਾਇਣਾਂ ਜਾਂ ਘ੍ਰਿਣਾਯੋਗ ਕਲੀਨਰ ਦੀ ਵਰਤੋਂ ਨਾ ਕਰੋ ampਜੀਵ

8. ਸਮੱਸਿਆ ਨਿਪਟਾਰਾ

ਜੇਕਰ ਤੁਹਾਨੂੰ ਸਮੱਸਿਆਵਾਂ ਆਉਂਦੀਆਂ ਹਨ, ਤਾਂ ਹੇਠ ਲਿਖੀਆਂ ਆਮ ਸਮੱਸਿਆਵਾਂ ਅਤੇ ਹੱਲ ਵੇਖੋ:

ਸਮੱਸਿਆਸੰਭਵ ਕਾਰਨਹੱਲ
Amplifier does not turn on (POWER LED off)ਕੋਈ ਪਾਵਰ, ਜ਼ਮੀਨ, ਜਾਂ ਰਿਮੋਟ ਸਿਗਨਲ ਨਹੀਂ; ਫਿਊਜ਼ ਉੱਡ ਗਿਆ ਹੈਪਾਵਰ, ਗਰਾਊਂਡ, ਅਤੇ ਰਿਮੋਟ ਵਾਇਰ ਕਨੈਕਸ਼ਨਾਂ ਦੀ ਜਾਂਚ ਕਰੋ। ਬੈਟਰੀ 'ਤੇ ਅਤੇ ਚਾਲੂ ਹੋਣ 'ਤੇ ਫਿਊਜ਼ ਦੀ ਪੁਸ਼ਟੀ ਕਰੋ। amplifier (if applicable). Ensure head unit is on.
Ampਲਾਈਫਾਇਰ ਚਾਲੂ ਹੁੰਦਾ ਹੈ ਪਰ ਕੋਈ ਆਵਾਜ਼ ਨਹੀਂ ਹੁੰਦੀRCA cables disconnected; Speaker wires disconnected or shorted; Gain too low; Head unit volume too lowCheck RCA connections. Inspect speaker wiring for shorts or disconnections. Adjust gain. Increase head unit volume.
PROT (Protection) LED is onOverheating; Speaker short circuit; Low impedance load; DC offsetਬੰਦ ਕਰ ਦਿਓ amplifier and allow to cool. Check speaker wiring for shorts. Ensure speaker impedance matches amplifier's rating. Consult a professional if issue persists.
ਵਿਗੜਿਆ ਆਵਾਜ਼Gain set too high; Improper crossover settings; Damaged speakers; Poor quality audio sourceReduce gain. Adjust crossover settings. Inspect speakers. Use a high-quality audio source.
Engine noise/whinePoor grounding; RCA cables too close to power wires; Faulty head unit or alternatorEnsure proper ground connection. Reroute RCA cables away from power wires. Consider a ground loop isolator. Test head unit and alternator.

9 ਨਿਰਧਾਰਨ

The following are the technical specifications for the Stetsom HL 2000.4 ampਜੀਵਤ:

  • ਮਾਡਲ: HL2000.4
  • ਬ੍ਰਾਂਡ: ਸਟੇਟਸਮ
  • ਚੈਨਲਾਂ ਦੀ ਗਿਣਤੀ: 4
  • ਆਉਟਪੁੱਟ ਪਾਵਰ: 2180 ਵਾਟਸ
  • ਵੋਲtage: 12.6 ਵੋਲਟ
  • ਘੱਟੋ-ਘੱਟ ਸਪਲਾਈ ਵੋਲtage: 9 ਵੋਲਟ
  • ਅਧਿਕਤਮ ਸਪਲਾਈ ਵਾਲੀਅਮtage: 15 ਵੋਲਟ (DC)
  • ਮੌਜੂਦਾ ਸਪਲਾਈ: 88 Amps
  • ਓਪਰੇਟਿੰਗ ਤਾਪਮਾਨ: 55 ਡਿਗਰੀ ਸੈਲਸੀਅਸ
  • ਆਈਟਮ ਦੇ ਮਾਪ (L x W x H): 10.24 x 9.45 x 3.54 ਇੰਚ
  • ਆਈਟਮ ਦਾ ਭਾਰ: 2.23 ਕਿਲੋਗ੍ਰਾਮ
  • ਸਮੱਗਰੀ ਦੀ ਕਿਸਮ: ਅਲਮੀਨੀਅਮ
  • ਮਾਊਂਟਿੰਗ ਦੀ ਕਿਸਮ: ਸਰਫੇਸ ਮਾਊਂਟ
  • ਸ਼ਾਮਿਲ ਭਾਗ: Ampਵਧੇਰੇ ਜੀਵਤ
  • ਨਿਰਧਾਰਨ ਮਿਲੇ: FCC

10. ਵਾਰੰਟੀ ਅਤੇ ਸਹਾਇਤਾ

The Stetsom HL 2000.4 amplifier a ਦੇ ਨਾਲ ਆਉਂਦਾ ਹੈ 1 ਸਾਲ ਦੀ ਨਿਰਮਾਤਾ ਵਾਰੰਟੀ. For warranty claims or technical support, please contact your authorized Stetsom dealer or visit the official Stetsom webਸੰਪਰਕ ਜਾਣਕਾਰੀ ਲਈ ਸਾਈਟ.

ਵਾਧੂ ਸਰੋਤਾਂ ਅਤੇ ਉਤਪਾਦ ਜਾਣਕਾਰੀ ਲਈ, ਤੁਸੀਂ ਇੱਥੇ ਜਾ ਸਕਦੇ ਹੋ Stetsom Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.