ਸਭ ਲਈ ਇੱਕ WM7471

One For All WM7471 Universal TV Tripod Stand Instruction Manual

ਮਾਡਲ: WM7471

1. ਜਾਣ-ਪਛਾਣ

This manual provides detailed instructions for the assembly, operation, and maintenance of your One For All WM7471 Universal TV Tripod Stand. Please read this manual thoroughly before installation and retain it for future reference. This stand is designed to securely hold televisions ranging from 32 to 65 inches with VESA mounting patterns between 200x100mm and 400x400mm.

2 ਸੁਰੱਖਿਆ ਜਾਣਕਾਰੀ

ਚੇਤਾਵਨੀ: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding of your warranty. If you have any questions, please contact customer support.

  • ਅਸੈਂਬਲੀ ਤੋਂ ਪਹਿਲਾਂ ਯਕੀਨੀ ਬਣਾਓ ਕਿ ਸਾਰੇ ਹਿੱਸੇ ਮੌਜੂਦ ਹਨ ਅਤੇ ਨੁਕਸਾਨ ਤੋਂ ਮੁਕਤ ਹਨ। ਖਰਾਬ ਹੋਏ ਹਿੱਸਿਆਂ ਦੀ ਵਰਤੋਂ ਨਾ ਕਰੋ।
  • Do not exceed the maximum weight capacity or screen size specified in the specifications section.
  • Always assemble the stand on a flat, stable surface.
  • Ensure the TV is securely attached to the mounting brackets and the stand is stable before releasinਜੀ ਟੀਵੀ।
  • ਅਸੈਂਬਲੀ ਦੌਰਾਨ ਬੱਚਿਆਂ ਅਤੇ ਪਾਲਤੂ ਜਾਨਵਰਾਂ ਨੂੰ ਦੂਰ ਰੱਖੋ। ਛੋਟੇ ਹਿੱਸੇ ਸਾਹ ਘੁੱਟਣ ਦਾ ਖ਼ਤਰਾ ਹੋ ਸਕਦੇ ਹਨ।
  • Do not attempt to modify the stand.
  • ਸਮੇਂ-ਸਮੇਂ 'ਤੇ ਸਾਰੇ ਪੇਚਾਂ ਅਤੇ ਕਨੈਕਸ਼ਨਾਂ ਦੀ ਜਾਂਚ ਕਰੋ ਤਾਂ ਜੋ ਇਹ ਯਕੀਨੀ ਬਣਾਇਆ ਜਾ ਸਕੇ ਕਿ ਉਹ ਤੰਗ ਅਤੇ ਸੁਰੱਖਿਅਤ ਰਹਿਣ।

3. ਪੈਕੇਜ ਸਮੱਗਰੀ

Verify that all parts listed below are included in your package. If any parts are missing or damaged, do not proceed with assembly and contact customer support.

  • Tripod Base Assembly (Wooden legs, central column)
  • TV Mounting Brackets (Horizontal bars)
  • Vertical Support Bar
  • Cable Management Strap (Leather)
  • Universal Soundbar Attachment
  • Hardware Kit (Screws, washers, spacers for TV mounting)
  • ਨਿਰਦੇਸ਼ ਦਸਤਾਵੇਜ਼ (ਇਹ ਦਸਤਾਵੇਜ਼)
One For All WM7471 Universal TV Tripod Stand components
ਚਿੱਤਰ 1: ਵੱਧview of the One For All WM7471 Universal TV Tripod Stand components. This image shows the main parts including the tripod base, central column, and TV mounting brackets.

4. ਸੈੱਟਅੱਪ ਅਤੇ ਅਸੈਂਬਲੀ

Follow these steps carefully to assemble your TV tripod stand. It is recommended to have a second person assist with mounting the television.

  1. Assemble the Tripod Base:

    Carefully attach the three wooden legs to the central column. Ensure they are securely fastened according to the provided diagrams in the separate assembly guide (if applicable). The design allows for tool-free or minimal tool assembly.

    Close-up of the One For All logo on the central column where the legs connect
    Figure 2: Detail of the central connection point of the tripod stand, showing the secure attachment of the wooden legs to the main column.
  2. Attach TV Mounting Brackets to TV:

    Identify the VESA mounting holes on the back of your television. Select the appropriate screws, washers, and spacers from the hardware kit that match your TV's specifications. Attach the horizontal TV mounting brackets to the back of your TV. Ensure they are level and securely tightened.

    Close-up of the VESA mounting bar with various hole patterns
    Figure 3: The VESA mounting bar, illustrating the multiple hole patterns for compatibility with various TV models.
  3. ਟੀਵੀ ਨੂੰ ਖੜ੍ਹੇ ਕਰਨ ਲਈ ਮਾਊਂਟ ਕਰੋ:

    With assistance, carefully lift the television and hook the attached mounting brackets onto the vertical support bar of the tripod stand. Ensure the TV is centered and level. Secure the TV to the stand using the provided safety mechanisms, such as locking screws or clips, to prevent accidental dislodgement.

    Close-up of the TV mounting bracket attached to the central column with cable management
    ਚਿੱਤਰ 4: ਇੱਕ ਵਿਸਤ੍ਰਿਤ view of the TV mounting bracket securely fastened to the stand's central column, also showing the integrated cable management clip.
  4. ਕੇਬਲ ਪ੍ਰਬੰਧਨ:

    Utilize the integrated cable management strap and clips to route and conceal TV and accessory cables along the central column and down one of the legs. This helps maintain a tidy appearance and prevents tripping hazards.

    Close-up of a cable being routed along a wooden leg of the tripod stand
    ਚਿੱਤਰ 5: ਇੱਕ ਸਾਬਕਾample of cable management, showing a cable neatly routed along one of the wooden tripod legs.
  5. Soundbar Attachment (Optional):

    If using a soundbar, attach the universal soundbar attachment to the TV mounting brackets as per its specific instructions. This allows the soundbar to move with the TV when adjusted.

5. ਸੰਚਾਲਨ ਨਿਰਦੇਸ਼ (ਵਿਵਸਥਾ)

The One For All WM7471 stand offers flexibility in TV positioning.

  • ਉਚਾਈ ਸਮਾਯੋਜਨ:

    The TV can be adjusted vertically along the central column. Loosen the height adjustment mechanism (refer to the assembly guide for specific details), slide the TV to the desired height, and then securely tighten the mechanism. Always ensure the TV is level after adjustment.

  • 360° ਸਵਿਵਲ:

    The entire TV and mounting assembly can be rotated 360 degrees around the central column. Gently rotate the TV to achieve the optimal viewing angle. Ensure no cables are snagged or strained during rotation.

    ਪਾਸੇ view of the TV tripod stand with a television mounted, showing its slim profile
    ਚਿੱਤਰ 6: ਸਾਈਡ ਪ੍ਰੋfile of the stand with a TV, demonstrating the potential for swivel and height adjustments.

6. ਰੱਖ-ਰਖਾਅ

ਨਿਯਮਤ ਰੱਖ-ਰਖਾਅ ਤੁਹਾਡੇ ਟੀਵੀ ਸਟੈਂਡ ਦੀ ਲੰਬੀ ਉਮਰ ਅਤੇ ਸੁਰੱਖਿਅਤ ਸੰਚਾਲਨ ਨੂੰ ਯਕੀਨੀ ਬਣਾਉਂਦਾ ਹੈ।

  • ਸਫਾਈ: Use a soft, dry cloth to wipe down the stand. For stubborn marks, a slightly damp ਹਲਕੇ ਸਾਬਣ ਵਾਲੇ ਕੱਪੜੇ ਦੀ ਵਰਤੋਂ ਕੀਤੀ ਜਾ ਸਕਦੀ ਹੈ, ਜਿਸ ਤੋਂ ਬਾਅਦ ਤੁਰੰਤ ਸੁਕਾਇਆ ਜਾ ਸਕਦਾ ਹੈ। ਘਸਾਉਣ ਵਾਲੇ ਕਲੀਨਰ ਜਾਂ ਘੋਲਨ ਵਾਲੇ ਪਦਾਰਥਾਂ ਤੋਂ ਬਚੋ।
  • ਨਿਰੀਖਣ: Periodically check all screws, bolts, and connections for tightness. Re-tighten if necessary.
  • ਕੇਬਲ ਪ੍ਰਬੰਧਨ: Ensure cables remain neatly organized and are not pinched or strained.

7. ਸਮੱਸਿਆ ਨਿਪਟਾਰਾ

ਜੇਕਰ ਤੁਹਾਨੂੰ ਆਪਣੇ ਟੀਵੀ ਸਟੈਂਡ ਨਾਲ ਸਮੱਸਿਆਵਾਂ ਆਉਂਦੀਆਂ ਹਨ, ਤਾਂ ਹੇਠ ਲਿਖੀਆਂ ਆਮ ਸਮੱਸਿਆਵਾਂ ਅਤੇ ਹੱਲ ਵੇਖੋ:

ਸਮੱਸਿਆਸੰਭਵ ਕਾਰਨਹੱਲ
ਸਟੈਂਡ ਅਸਥਿਰ ਮਹਿਸੂਸ ਹੁੰਦਾ ਹੈ।Loose connections; uneven floor; TV too heavy/large.Ensure all screws are tightened. Move stand to a level surface. Verify TV weight and size are within specifications.
ਟੀਵੀ ਪੱਧਰ 'ਤੇ ਨਹੀਂ ਹੈ।Mounting brackets unevenly attached; stand not level.Re-adjust TV mounting brackets. Ensure stand is on a level surface.
ਉਚਾਈ ਜਾਂ ਘੁਮਾਉਣ ਵਿੱਚ ਮੁਸ਼ਕਲ।Adjustment mechanism is too tight or obstructed.Loosen adjustment mechanism slightly. Check for cable obstructions. Do not force movement.

If the problem persists, please contact One For All customer support.

8 ਨਿਰਧਾਰਨ

ਵਿਸ਼ੇਸ਼ਤਾਵੇਰਵੇ
ਮਾਡਲ ਨੰਬਰWM7471
ਬ੍ਰਾਂਡਸਾਰਿਆਂ ਲਈ ਇੱਕ
ਅਨੁਕੂਲ ਸਕ੍ਰੀਨ ਆਕਾਰ32 - 65 ਇੰਚ
VESA ਅਨੁਕੂਲਤਾ200x100mm ਤੋਂ 400x400mm
ਅੰਦੋਲਨ ਦੀ ਕਿਸਮ360° Swivel, Height Adjustable
ਸਮੱਗਰੀWood (Walnut), Metal (Gunmetal/Chrome)
ਰੰਗWalnut & Gunmetal
ਸ਼ਾਮਿਲ ਭਾਗTripod stand, TV mounting hardware, cable management strap, universal soundbar attachment

9. ਵਾਰੰਟੀ ਅਤੇ ਸਹਾਇਤਾ

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official One For All webਸਾਈਟ। ਖਾਸ ਵਾਰੰਟੀ ਦੀਆਂ ਸ਼ਰਤਾਂ ਖੇਤਰ ਅਤੇ ਰਿਟੇਲਰ ਅਨੁਸਾਰ ਵੱਖ-ਵੱਖ ਹੋ ਸਕਦੀਆਂ ਹਨ।

ਨਿਰਮਾਤਾ: ਸਾਰਿਆਂ ਲਈ ਇੱਕ

ਉਦਗਮ ਦੇਸ਼: ਚੀਨ

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.