ASHATA Prime B365M D2VX SI LGA 1151 Motherboard Instruction Manual

1. ਜਾਣ-ਪਛਾਣ

This manual provides detailed instructions for the installation, operation, and maintenance of your ASHATA Prime B365M D2VX SI motherboard. This M-ATX motherboard supports 9th and 8th Generation Intel Core i9, i7, i5, i3, Pentium, and Celeron series processors with an LGA 1151 socket. It features integrated Gigabit Ethernet for network connectivity and an ALC887 7.1 channel sound chip for audio. Please read this manual thoroughly before proceeding with installation.

ਚਿੱਤਰ 1.1: ASHATA Prime B365M D2VX SI Motherboard. This image displays the overall layout of the motherboard, highlighting the LGA 1151 socket, DDR4 memory slots, and various connectors. It supports 9th and 8th Gen Intel CPUs, features integrated Gigabit LAN, and an ALC887 7.1 channel sound chip.

2. ਸੈੱਟਅੱਪ ਅਤੇ ਇੰਸਟਾਲੇਸ਼ਨ

2.1 CPU ਸਥਾਪਨਾ

Ensure the CPU socket lever is open. Carefully align your LGA 1151 processor with the socket, matching the triangular markers on the CPU and socket. Gently place the CPU into the socket without forcing it. Close the lever to secure the CPU.

2.2 ਮੈਮੋਰੀ (RAM) ਇੰਸਟਾਲੇਸ਼ਨ

This motherboard features two DDR4 DIMM slots, supporting dual-channel DDR4 2666/2400/2133MHz memory modules up to a maximum capacity of 32GB. Open the clips on both ends of the DIMM slot. Align the memory module with the slot, ensuring the notch on the module matches the key in the slot. Press down firmly on both ends of the module until the clips snap into place.

ਚਿੱਤਰ 2.1: Double Channel DDR4 Memory Slots. This image highlights the two DDR4 memory slots and the M.2 slot. The motherboard supports up to 32GB of DDR4 2666/2400/2133MHz memory and includes four Serial ATA III ports and one M.2 slot for storage.

2.3 ਸਟੋਰੇਜ਼ ਡਿਵਾਈਸ ਇੰਸਟਾਲੇਸ਼ਨ

The motherboard provides four Serial ATA III (SATA 6Gbps) interfaces for traditional hard drives and SSDs, and one M.2 slot for high-speed NVMe or SATA M.2 SSDs. Connect SATA data cables from your storage devices to the SATA ports on the motherboard. For M.2 SSDs, insert the module into the M.2 slot and secure it with the provided screw.

2.4 PCI Express Card Installation

The motherboard includes one PCI Express x16 graphics slot and two PCI Express x1 slots. Insert your graphics card or other expansion cards into the appropriate slots, ensuring they are fully seated and secured with the case's retention mechanism.

ਚਿੱਤਰ 2.2: PCI E Slots. This image shows the PCI E 3.0 standard slots, including one PCI E x16 graphics slot and two PCI E x1 slots, allowing for expansion with discrete graphics cards, sound cards, and network cards.

2.5 ਪਾਵਰ ਕਨੈਕਸ਼ਨ

Connect the 24-pin ATX main power connector and the 8-pin ATX 12V power connector from your power supply unit (PSU) to the corresponding ports on the motherboard. Ensure all power connections are secure.

ਚਿੱਤਰ 2.3: Multi-Phase Power Supply Area. This image illustrates the robust construction of the motherboard, featuring all solid-state capacitors and 8-pin plus 24-pin power connectors for stable performance and long service life.

2.6 ਪੈਰੀਫਿਰਲ ਕਨੈਕਸ਼ਨ

Connect your peripherals to the rear I/O panel. This includes USB 3.1 Gen 1 ports (4 on rear), USB 2.0 ports (2 on rear), the RJ-45 Ethernet port, and the 3 audio jacks. The motherboard also features a DVI interface for video output.

ਚਿੱਤਰ 2.4: DVI Output and Rear I/O Ports. This image displays the rear I/O panel, highlighting the DVI output for connecting to a TV or display, along with USB ports, Ethernet, and audio jacks.

3. ਓਪਰੇਟਿੰਗ ਹਦਾਇਤਾਂ

3.1 ਸ਼ੁਰੂਆਤੀ ਬੂਟ-ਅੱਪ

After assembling all components and connecting power, press the power button on your computer case. The system should initiate the boot process. If no display appears, refer to the troubleshooting section.

3.2 BIOS/UEFI ਪਹੁੰਚ

BIOS/UEFI ਸੈੱਟਅੱਪ ਸਹੂਲਤ ਤੱਕ ਪਹੁੰਚ ਕਰਨ ਲਈ, ਨਿਰਧਾਰਤ ਕੁੰਜੀ ਦਬਾਓ (ਆਮ ਤੌਰ 'ਤੇ ਡੀ.ਈ.ਐਲ or F2) repeatedly during the initial boot sequence. The BIOS/UEFI allows you to configure system settings, boot order, and monitor hardware status.

3.3 ਡਿਸਪਲੇ ਆਉਟਪੁੱਟ

Connect your monitor to the DVI port on the motherboard's rear I/O panel for integrated graphics output. If a discrete graphics card is installed, connect your monitor to the graphics card's output ports.

3.4 Network and Audio

The integrated Gigabit LAN provides high-speed network connectivity. Connect an Ethernet cable to the RJ-45 port. For audio, connect speakers or headphones to the appropriate audio jacks on the rear I/O panel. The ALC887 7.1 channel sound chip supports various audio configurations.

4. ਰੱਖ-ਰਖਾਅ

ਸਹੀ ਦੇਖਭਾਲ ਤੁਹਾਡੇ ਮਦਰਬੋਰਡ ਦੀ ਲੰਬੀ ਉਮਰ ਅਤੇ ਸਥਿਰ ਪ੍ਰਦਰਸ਼ਨ ਨੂੰ ਯਕੀਨੀ ਬਣਾਉਂਦੀ ਹੈ।

• ਸਫਾਈ: Regularly clean dust from inside your computer case using compressed air. Ensure the system is powered off and unplugged before cleaning. Avoid using liquids or abrasive materials.
• ਸਥਿਰ ਬਿਜਲੀ: Always discharge static electricity from your body before handling the motherboard or other components. Use an anti-static wrist strap if available.
• BIOS ਅੱਪਡੇਟ: ਸਮੇਂ-ਸਮੇਂ 'ਤੇ ਨਿਰਮਾਤਾ ਦੀ ਜਾਂਚ ਕਰੋ webBIOS/UEFI ਅੱਪਡੇਟਾਂ ਲਈ ਸਾਈਟ। ਅੱਪਡੇਟ ਅਨੁਕੂਲਤਾ, ਸਥਿਰਤਾ ਅਤੇ ਪ੍ਰਦਰਸ਼ਨ ਨੂੰ ਬਿਹਤਰ ਬਣਾ ਸਕਦੇ ਹਨ। ਸਿਸਟਮ ਦੇ ਨੁਕਸਾਨ ਤੋਂ ਬਚਣ ਲਈ ਅੱਪਡੇਟ ਨਿਰਦੇਸ਼ਾਂ ਦੀ ਧਿਆਨ ਨਾਲ ਪਾਲਣਾ ਕਰੋ।
• ਵਾਤਾਵਰਣ ਦੀਆਂ ਸਥਿਤੀਆਂ: Operate the motherboard in a well-ventilated environment with stable temperature and humidity to prevent overheating and component degradation.

5. ਸਮੱਸਿਆ ਨਿਪਟਾਰਾ

If you encounter issues, perform the following basic troubleshooting steps:

• ਕੋਈ ਸ਼ਕਤੀ ਨਹੀਂ:
  • Check if the power supply unit (PSU) is connected and switched on.
  • Ensure the 24-pin and 8-pin power connectors are securely attached to the motherboard.
  • ਪੁਸ਼ਟੀ ਕਰੋ ਕਿ ਫਰੰਟ ਪੈਨਲ ਪਾਵਰ ਸਵਿੱਚ ਕੇਬਲ ਮਦਰਬੋਰਡ ਹੈੱਡਰ ਨਾਲ ਸਹੀ ਢੰਗ ਨਾਲ ਜੁੜੀ ਹੋਈ ਹੈ।
• ਕੋਈ ਡਿਸਪਲੇ ਨਹੀਂ:
  • Confirm the monitor is connected to the correct video output (motherboard DVI or discrete graphics card).
  • Reseat the graphics card (if applicable) and memory modules.
  • ਜੇ ਸੰਭਵ ਹੋਵੇ ਤਾਂ ਕਿਸੇ ਵੱਖਰੇ ਮਾਨੀਟਰ ਜਾਂ ਕੇਬਲ ਨਾਲ ਟੈਸਟ ਕਰੋ।
• ਸਿਸਟਮ ਅਸਥਿਰਤਾ/ਕਰੈਸ਼:
  • ਇਹ ਯਕੀਨੀ ਬਣਾਉਣ ਲਈ ਕਿ ਉਹ ਸੁਰੱਖਿਅਤ ਓਪਰੇਟਿੰਗ ਸੀਮਾਵਾਂ ਦੇ ਅੰਦਰ ਹਨ, CPU ਅਤੇ GPU ਤਾਪਮਾਨ ਦੀ ਜਾਂਚ ਕਰੋ।
  • Verify memory modules are properly seated and functioning correctly (test one module at a time).
  • ਯਕੀਨੀ ਬਣਾਓ ਕਿ ਸਾਰੇ ਡਰਾਈਵਰ ਅੱਪ ਟੂ ਡੇਟ ਹਨ।
• Network Not Detected:
  • Ensure the Ethernet cable is securely connected to the RJ-45 port and the router/modem.
  • Check network adapter drivers in the operating system.
  • Verify network settings in the operating system.
• ਕੋਈ ਆਡੀਓ ਨਹੀਂ:
  • Confirm speakers/headphones are connected to the correct audio jacks.
  • Check audio drivers and sound settings in the operating system.
  • Ensure the front panel audio connector is correctly attached to the motherboard header.

6 ਨਿਰਧਾਰਨ

Below are the detailed specifications for the ASHATA Prime B365M D2VX SI motherboard:

7. ਵਾਰੰਟੀ ਅਤੇ ਸਹਾਇਤਾ

For warranty information and technical support, please refer to the documentation included with your purchase or visit the official ASHATA website. Keep your proof of purchase for warranty claims. If you encounter issues not covered in this manual, contact ASHATA customer support for assistance.