Elitech Glog 5 Real Time Single Use IoT Data Logger
ਉਤਪਾਦ ਦੀ ਪੇਸ਼ਕਾਰੀ
- Back mounted hanging hole
- LCD ਡਿਸਪਲੇਅ ਸਕਰੀਨ
- LED ਸੂਚਕ ਰੋਸ਼ਨੀ
- Start stop button
- ਕ੍ਰਮ ਸੰਖਿਆ
- ਲਾਈਟ ਸੈਂਸਰ
- Power supply+data interface
- ਬਿਲਟ-ਇਨ ਸੈਂਸਰ
- Activate/Flight Mode Button
- ਬਾਹਰੀ ਸੈਂਸਰ
LCD ਡਿਸਪਲੇਅ
- ਕੰਮ ਦੀ ਸਥਿਤੀ
- ਫੰਕਸ਼ਨ ਵੇਰਵਾ
- ਫਲਾਈਟ ਮੋਡ
- ਸਿਗਨਲ ਸਥਿਤੀ
- ਬੈਟਰੀ ਪੱਧਰ
- ਰੋਸ਼ਨੀ ਅਤੇ ਵਾਈਬ੍ਰੇਸ਼ਨ ਅਲਾਰਮ ਚਿੰਨ੍ਹ
- Time and number of records
- Temperature and humidity values
ਨੋਟ: To ensure data reliability, please do not enable recording when the battery level is less than or equal to 20% ( 
between 10% and 20%)
ਚੋਣ ਸਾਰਣੀ
(ਮਿਆਰੀ ਰੌਸ਼ਨੀ ਅਤੇ ਵਾਈਬ੍ਰੇਸ਼ਨ ਸੈਂਸਰ)
| ਮਾਡਲ | ਪੜਤਾਲ ਦੀ ਕਿਸਮ | ਮਾਪਣ ਦੀ ਸੀਮਾ | ਸ਼ੁੱਧਤਾ |
|
ਗਲੌਗ 5 ਟੀ |
Built in temperature |
-30℃~70℃ |
±0.5℃ |
|
ਗਲੌਗ 5 ਟੀਐਚ |
Built in temperature and humidity |
-30℃~70℃ 0%RH~100%RH | ±0.5℃
± 5% ਆਰ.ਐੱਚ |
|
ਗਲੌਗ 5 ਟੀ.ਈ. |
External temperature+internal temperature |
-40℃~85℃ |
±0.5℃ |
|
ਬਲੌਗ 5 ਦ |
External temperature and humidity+internal temperature |
External: -40℃~85℃ 0%RH~100%RH
built-in: -30℃~70℃ |
±0.5℃
± 5% ਆਰ.ਐੱਚ |
|
ਗਲੌਗ 5 ਟੀ.ਐਲ.ਈ. |
External ultra-low temperature+internal temperature | External: -200℃~150℃ built-in: -30℃~70℃ | ±0.5℃(-40℃~85℃)
±1℃(-100℃~150℃) ± 2 ℃ (other) |
| Glog 5 CO₂ | External ul-CO₂ & temperature
& humidity built-in temperature |
-30℃~70℃ 0%RH~100%RH
0%~100vol% |
±0.5℃
± 5% ਆਰ.ਐੱਚ 1vol%+3vol% measured |
ਤਕਨੀਕੀ ਪੈਰਾਮੀਟਰ
| ਵਾਈਬ੍ਰੇਸ਼ਨ ਰੇਂਜ | 0 ਗ੍ਰਾਮ ~ 16 ਗ੍ਰਾਮ |
| Range of illumination intensity | 0~52000Lux |
| ਹੱਲ ਕਰਨ ਦੀ ਸ਼ਕਤੀ | 0.1°C/0.1%RH/0.1g/1Lux |
| ਕੁੰਜੀ | ਡਬਲ ਬਟਨ ਡਿਜ਼ਾਈਨ |
| ਸੂਚਕ ਰੋਸ਼ਨੀ | ਲਾਲ ਅਤੇ ਹਰੇ, ਲਾਲ ਅਤੇ ਨੀਲੇ LED ਸੂਚਕ ਲਾਈਟਾਂ |
| ਡਿਸਪਲੇ | Broken code display screen |
| ਸਥਿਤੀ ਵਿਧੀ | LBS+GPS (optional) |
| ਸਟੋਰੇਜ ਸਮਰੱਥਾ | 60000 (pre shadow data) 32000 (normal recording+rear shadow data) |
| Shadow data | ਅੱਗੇ+ਪਿੱਛੇ |
| ਰਿਕਾਰਡ ਅੰਤਰਾਲ | 1min~24h; Default: 5 minutes |
| ਅੱਪਲੋਡ ਅੰਤਰਾਲ | 1min~24h adjustable Default: 60 minutes |
| ਡਾਟਾ ਅੱਪਲੋਡ ਵਿਧੀ | 4G+2G |
| Freight initiation method | Button, platform, timer |
| Freight stopping method | Button, platform, full memory |
| Repeat startup | 3 times (within the shelf life) |
| ਫਲਾਈਟ ਮੋਡ | Button, timer, electronic fence |
| ਅਲਾਰਮ ਮੋਡ | Overlimit and low battery |
| ਬੈਟਰੀ ਦੀ ਕਿਸਮ | 3.0V disposable lithium manganese battery 4800mAh (CR14505 3B6H) |
| OTA ਅੱਪਗਰੇਡ | Upgrades can be made through data management software and platforms |
| ਵਾਟਰਪ੍ਰੂਫ ਗ੍ਰੇਡ | IP65 (ਬਿਲਟ-ਇਨ) |
| ਕੰਮ ਦਾ ਮਾਹੌਲ | -30 ℃~70℃, 0% RH~100% RH (non condensing) |
| ਸਟੋਰੇਜ਼ ਵਾਤਾਵਰਣ | 15~30℃，20~75%RH |
| ਨਿਰਧਾਰਨ ਅਤੇ ਆਕਾਰ | 103 x 61.3 x 30 (ਮਿਲੀਮੀਟਰ) |
| ਬੈਟਰੀ ਜੀਵਨ | Record once every 5 minutes in a 25 ℃ environment, upload every 30 minutes, and use the temperature and humidity recorder for a total of 60 days; |
| ਸ਼ੈਲਫ ਦੀ ਜ਼ਿੰਦਗੀ | (Usage time+Storage time) 1 year |
ਤਕਨੀਕੀ ਪੈਰਾਮੀਟਰ
ਡਿਵਾਈਸ ਸ਼ਾਮਲ ਕਰੋ
ਲਾਗਇਨ ਪਲੇਟਫਾਰਮ webਸਾਈਟ: http://www.i-elitech.com, or scan the code to download and install the APP . Register, log in, and add devices according to the prompts.
ਐਕਟੀਵੇਸ਼ਨ
ਨੂੰ ਦਬਾ ਕੇ ਰੱਖੋ 
button for 5s, and the screen will display normally, indicating that the device has been activated.
ਨੋਟ: Clicking on the button and the screen displaying normally indicates that the device has been activated;
ਸਟਾਰਟ ਰਿਕਾਰਡ
ਨੂੰ ਦਬਾ ਕੇ ਰੱਖੋ 
button for 5s, and the screen will display a 
symbol, indicating successful startup recording; If theindicator flashes, it will enter a delayed countdown state, and after the delay ends, it will automatically start recording;
ਰਿਕਾਰਡਿੰਗ ਬੰਦ ਕਰੋ
ਨੂੰ ਦਬਾ ਕੇ ਰੱਖੋ button for 5s, and the screen will display a 
sign indicating that the recording has been successfully stopped;
ਡਾਟਾ ਨਿਰਯਾਤ
The device is connected to the computer USB interface through a data cable and will automatically generate PDF+CSV format data reports. You can copy the generated report to your computer for saving.
ਨੋਟ: The keys are invalid during the data export process
ਫਲਾਈਟ ਮੋਡ
- ਯੋਗ ਕਰੋ: ਨੂੰ ਦਬਾ ਕੇ ਰੱਖੋ button for 5s, and the screen will display a
symbol indicating that the airplane mode has been successfully activated; - ਬੰਦ ਕਰੋ: ਨੂੰ ਦਬਾ ਕੇ ਰੱਖੋ button for 5s. If the screen icon disappears, it indicates that the airplane mode has been turned off;
ਨੋਟ: To enable and disable other flight modes, please operate through the platform or app.
Freight Management Operation Instructions
- After logging into the platform or app, click on the ‘Freight Management’ menu in the main menu;
- Click on the ‘Configuration’ menu on the homepage, and sequentially create and add ‘User Management’, ‘Carrier’, ‘Location’, ‘Alarm Presets’, and’ Freight Template ‘;
- Click on the ‘Freight Management’ menu on the homepage to create and manage freight;
ਨੋਟ: For detailed operation manuals, please refer to the operating instructions on the platform or APP;
LED ਸੂਚਕ ਰੋਸ਼ਨੀ ਦਾ ਵੇਰਵਾ
LCD ਡਿਸਪਲੇ ਨਿਰਦੇਸ਼
ਸੁਰੱਖਿਆ ਨਿਰਦੇਸ਼ ਅਤੇ ਸਾਵਧਾਨੀਆਂ
ਸੁਰੱਖਿਆ ਨਿਰਦੇਸ਼
- ਇਹ ਯਕੀਨੀ ਬਣਾਉਣ ਲਈ ਕਿ ਤੁਸੀਂ ਇਸ ਉਤਪਾਦ ਨੂੰ ਸਹੀ ਢੰਗ ਨਾਲ ਸਥਾਪਿਤ ਅਤੇ ਵਰਤਦੇ ਹੋ, ਕਿਰਪਾ ਕਰਕੇ ਹੇਠਾਂ ਦਿੱਤੇ ਨਿਯਮਾਂ ਨੂੰ ਪੜ੍ਹੋ ਅਤੇ ਉਹਨਾਂ ਦੀ ਸਖਤੀ ਨਾਲ ਪਾਲਣਾ ਕਰੋ:
ਬੈਟਰੀ
- Please use the original battery and do not use other batteries to prevent damage to the equipment or other malfunctions. Do not disassemble, squeeze, hit, or heat the battery privately, and do not place it in a fire, otherwise it may cause battery explosion and fire.
ਉਪਕਰਨ
- Do not use this equipment in flammable and explosive gas environments, otherwise it may cause explosions or fires. During the use of the equipment, if the equipment emits a burnt or other odor, the power supply should be immediately cut off and the manufacturer or supplier should be contacted in a timely manner.
Precautions and maintenance requirements
- If the equipment is not used for a long time, it should be removed and stored in a dry and cool environment in the packaging box.
- Users are not allowed to make any unauthorized changes to this device. Any unauthorized changes may affect the accuracy of the device or even damage it.
- Do not place the device outdoors for use to avoid instrument short circuits, burns, and other malfunctions caused by adverse weather conditions such as rain and lightning.
- When the recorder is offline (no data upload), please confirm the networking status of the device;
- ਕਿਰਪਾ ਕਰਕੇ ਰਿਕਾਰਡਰ ਦੀ ਮਾਪ ਸੀਮਾ ਦੇ ਅੰਦਰ ਵਰਤੋਂ ਕਰੋ
- Please do not forcefully impact this recorder
- Sensors should be calibrated regularly to ensure their accuracy meets usage requirements
- The measured values of the recorder may be affected by the following factors:
ਤਾਪਮਾਨ ਗਲਤੀ:
The stable time in the measurement environment is too short; Close to heat sources, cold sources, or directly exposed to sunlight.
Humidity error
The stable time in the measurement environment is too short; Long term exposure to steam, water mist, water curtains, or condensation environments.
ਦੂਸ਼ਿਤ
ਧੂੜ ਭਰੇ ਜਾਂ ਹੋਰ ਪ੍ਰਦੂਸ਼ਿਤ ਵਾਤਾਵਰਣ ਵਿੱਚ ਹੋਣਾ
- If the sensor is found to be blocked or contaminated, it should be wiped with a dust-free cloth dipped in clean water. It is strictly prohibited to use high molecular weight chemical solvents such as alcohol for wiping.
- If scrapped, it must be strictly handled in accordance with the “Regulations on the Management of Recycling and Disposal of Waste Electrical and Electronic Products”.
ਅਕਸਰ ਪੁੱਛੇ ਜਾਂਦੇ ਸਵਾਲ
What should I do if the battery level is less than 20%?
To ensure data reliability, do not enable recording when the battery level is less than or equal to 20%.
How do I know if the device is activated?
Clicking on the activation button and seeing the screen display normally indicates that the device has been activated.
How can I export data from the device?
Connect the device to the computer via USB to generate PDF+CSV format data reports automatically.
ਦਸਤਾਵੇਜ਼ / ਸਰੋਤ
 |
Elitech Glog 5 Real Time Single Use IoT Data Logger [pdf] ਯੂਜ਼ਰ ਮੈਨੂਅਲ Glog 5 T, Glog 5 TH, Glog 5 TE, Glog 5 THE, Glog 5 TLE, Glog 5 CO, Glog 5 Real Time Single Use IoT Data Logger, Glog 5, Real Time Single Use IoT Data Logger, Single Use IoT Data Logger, Data Logger, Logger |