MIBOXER SPIB5 5 in 1 SPI Plus DMX LED Controller

ਨਿਰਧਾਰਨ
- ਉਤਪਾਦ ਦਾ ਨਾਮ: 5 in 1 SPI+DMX LED Controller (BLE+2.4G)
- ਮਾਡਲ ਨੰਬਰ: ਐਸਪੀਆਈਬੀ5
- ਆਈ ਪੀ ਰੇਟ: IP20
- ਇਨਪੁਟ ਵੋਲtage: DC 5V-24V
- ਕੰਮ ਕਰਨ ਦਾ ਤਾਪਮਾਨ: -10~40°C
- ਆਊਟਪੁੱਟ ਮੌਜੂਦਾ: ਅਧਿਕਤਮ 10A
- ਮਾਪ: 74.5*36*17mm
- ਆਉਟਪੁੱਟ ਸਿਗਨਲ:
- SPI(TTL) 800Kbps (Max 1024 Pixel)
- ਡੀਐਮਐਕਸ: 250Kbps (Max 256 Pixel)
- ਸਟੈਂਡਬਾਏ ਮੌਜੂਦਾ: 20mA
- ਪ੍ਰੋਟੋਕੋਲ: BLE+RF 2.4GHz
- ਪ੍ਰਮਾਣੀਕਰਨ: CE, EMC, LVD, RED
ਉਤਪਾਦ ਵਰਤੋਂ ਨਿਰਦੇਸ਼
SPI Mode Installation
- For SPI LED Strips, follow the SPI Installation Diagram provided. Ensure proper connections and power input within the specified range.
DMX Mode Installation
- For DMX LED Strips, follow the DMX Installation Diagram provided. Make sure to connect as per the instructions and input the correct power supply voltage.
Smart Phone APP Control
- Download and install the TUYA SMART APP from the application store.
- ਪੇਅਰਿੰਗ ਨੈੱਟਵਰਕ:
- Connect the controller to the mains and ensure the indicator is flashing quickly.
- You can correct the indicator status by long-pressing the SET button or powering off and on the controller 6 times.
- Connect your phone to a 2.4GHz home wifi network.
- Open the TUYA SMART APP, click on “Lighting and Light source (BLE+Wifi)” and follow the on-screen instructions to complete the pairing process.
ਉਤਪਾਦ ਵਿਸ਼ੇਸ਼ਤਾ
- Support BLE+2.4GHZ wireless transmitting technology
- 5 in 1 SPI controller, single color, cct, rgb, rgbw, rgb+cct output selection
- Speed, static mode, dynamic mode, and music mode are adjustable
- Dual SPI/DMX control protocol, compatible with DC5-24V input
- Dynamic mode: 28 kinds of white color and 80 kinds of RGB color for selection, it can change color, brightness, width, and speed for those modes
- 8 kinds of music modes work with the internal microphone and the smartphone microphone
- Freely switching between dynamic mode and music mode
- Setting up boot animation via TUYA APP
- Have DND mode, usually used in a power failure area, to save power
ਉਤਪਾਦ ਪੈਰਾਮੀਟਰ

ਮਾਪ

ਕਨੈਕਸ਼ਨ ਡਾਇਗ੍ਰਾਮ

ਐਪਲੀਕੇਸ਼ਨ ਡਾਇਗਰਾਮ

ਅਨੁਕੂਲ ਰਿਮੋਟ
( purchase separately)
ਲਿੰਕ/ਅਨਲਿੰਕ
- ਲਿੰਕ
- Power off for 10 seconds and power on again, or short-press “SET”
- Press the ” ON” button 3 times within 3 seconds.
- Green flashing state, then the code is successful.
- ਜੇਕਰ ਲਾਈਟ ਨਹੀਂ ਚਮਕਦੀ ਤਾਂ ਲਿੰਕ ਫੇਲ੍ਹ ਹੋ ਜਾਂਦਾ ਹੈ। ਕਿਰਪਾ ਕਰਕੇ ਉਪਰੋਕਤ ਕਦਮਾਂ ਨੂੰ ਦੁਹਰਾਓ।
- ਧਿਆਨ: can not link again if the remote has already finished linking.
ਅਣਲਿੰਕ ਕਰੋ
- Power off for 10 seconds and power on again, or short-press “SET”
- Press the “ON” button 5 times within 3 seconds.
- Red flashing state, then clear the code successfully.
- Unlink is failed if the light doesn’t flash, please repeat the above steps
- (ਧਿਆਨ: no need to unlink if the light is never be linked)
Smart Phone APP Control
Pairing Network (doesn’t support 5G router)
- Download and install the “TUYA SMART” APP
- Search “TUYA SMART” in the application store or scan the QR code. Please register an account if using it for the first time, log in to your account if you already have account

- Search “TUYA SMART” in the application store or scan the QR code. Please register an account if using it for the first time, log in to your account if you already have account
- ਪੇਅਰਿੰਗ ਨੈੱਟਵਰਕ
- Connect the controller to the mains
- Ensure indicator flashes quickly 2 times per seconds)
- You have 2 ways to correct the indicator status
- Long-press press” SET” button
- Power off and power on the controller 6 times
- Connect the phone with the home Wi-Fi 2.4 GHz network
- Open the APP interface, click “+”
- Click “Lighting” and “Light source (BLE+Wifi)
- Complete the rest steps

ਫੰਕਸ਼ਨ ਨਿਰਦੇਸ਼

ਸਥਿਰ ਮੋਡ
Adjust or save pure static illumination
- ਸਾਬਕਾ ਲਈample, regarding as App
Dynamic Mode ( select it via remote)
- 28 kinds of white color, 80 kinds of RGB color, save favorite modes, and 8 scenes mode, all modes can change color, brightness, width, and speed
ਸੰਗੀਤ ਮੋਡ
- 8 kinds of music modes work with the internal microphone andthe smart smartphone microphone
Setting Communication Protocol
- Setting it via APP
- Select SPI or DMX protocol

Setting the LED strip light
- Change output based on different LED strip lights like single color, CCT, RGB, RGBW, rgb+cct
- LED strip light types

Setting Pixel points
- Setting it via a program
- Slip the slider to change numbers

ਰੰਗ ਕੈਲੀਬ੍ਰੇਸ਼ਨ
- Correct the color of led strip light via APP

- Following the tip to complete color calibration
ਬੂਟ ਐਨੀਮੇਸ਼ਨ
- Setting color or color temperature, speed and brightness

ਟਾਈਮਰ ਫੰਕਸ਼ਨ
Setting it via APP
DND ਮੋਡ ਚਾਲੂ/ਬੰਦ
- Turn on DND mode ( usually used in power failure areas to save power)
ਅਲੈਕਸਾ ਵੌਇਸ ਕੰਟਰੋਲ ਨਿਰਦੇਸ਼
- Please add the device to the [Tuya Smart] app, then start following the steps.
- ਅਲੈਕਸਾ ਐਪ ਖੋਲ੍ਹੋ
- ਸੱਜੇ ਕੋਨੇ ਦੇ ਹੇਠਾਂ "ਹੋਰ" 'ਤੇ ਕਲਿੱਕ ਕਰੋ

- "ਹੁਨਰ ਅਤੇ ਖੇਡਾਂ" 'ਤੇ ਕਲਿੱਕ ਕਰੋ
- ਕਲਿਕ ਕਰੋ "
"ਉੱਪਰ ਸੱਜੇ ਕੋਨੇ 'ਤੇ - Type “Smart Life” and search

- Click the “Smart Life” skill, follow the instructions to finish the configuration, and start voice control

ਗੂਗਲ ਹੋਮ ਵੌਇਸ ਕੰਟਰੋਲ ਨਿਰਦੇਸ਼
ਕਿਰਪਾ ਕਰਕੇ ਡਿਵਾਈਸ ਨੂੰ [Tuya Smart] ਐਪ ਵਿੱਚ ਸ਼ਾਮਲ ਕਰੋ, ਫਿਰ ਕਦਮਾਂ ਦੀ ਪਾਲਣਾ ਕਰਨਾ ਸ਼ੁਰੂ ਕਰੋ
- ਗੂਗਲ ਹੋਮ ਐਪ ਖੋਲ੍ਹੋ
- Click “+” on the top left corner

- "ਡਿਵਾਈਸ ਸੈਟ ਅਪ ਕਰੋ" ਤੇ ਕਲਿਕ ਕਰੋ

- "Google ਨਾਲ ਕੰਮ ਕਰਦਾ ਹੈ" 'ਤੇ ਕਲਿੱਕ ਕਰੋ

- ਕਲਿੱਕ ਕਰੋ
ਉੱਪਰ ਸੱਜੇ ਕੋਨੇ 'ਤੇ - Type “Smart Life” and search
- Click the “Smart Life” skill, follow the instructions to finish the configuration, and start voice control

ਧਿਆਨ
- ਕਿਰਪਾ ਕਰਕੇ ਇੰਸਟਾਲੇਸ਼ਨ ਤੋਂ ਪਹਿਲਾਂ ਪਾਵਰ ਸਪਲਾਈ ਬੰਦ ਕਰੋ।
- ਕਿਰਪਾ ਕਰਕੇ ਇੰਪੁੱਟ ਵਾਲੀਅਮ ਨੂੰ ਯਕੀਨੀ ਬਣਾਓtage ਡਿਵਾਈਸ ਤੋਂ ਲੋੜਾਂ ਦੇ ਸਮਾਨ ਹੋਣਾ।
- Don’t disassemble the device if you are not an expert; otherwise, you will damage it.
- Please do not use the light in places with a wide range of metal areas or strong electromagnetic waves nearby, otherwise, the remote distance will be seriously affected.

ਅਕਸਰ ਪੁੱਛੇ ਜਾਂਦੇ ਸਵਾਲ
Can I control both SPI and DMX LED strips with this controller?
Yes, this controller supports both SPI and DMX LED strips. Follow the installation diagrams provided for each mode accordingly.
What is the maximum control distance for this LED controller?
The control distance for this LED controller is up to 30 meters.
ਦਸਤਾਵੇਜ਼ / ਸਰੋਤ
![]() |
MIBOXER SPIB5 5 in 1 SPI Plus DMX LED Controller [pdf] ਮਾਲਕ ਦਾ ਮੈਨੂਅਲ SPIB5, C9, SPIB5 5 in 1 SPI Plus DMX LED Controller, SPIB5, 5 in 1 SPI Plus DMX LED Controller, SPI Plus DMX LED Controller, DMX LED Controller, LED Controller, Controller |

